DML - Design & Manufacturing Laboratory







 

 

Publications

 

 

INTERNATIONAL JOURNALS

  • Antoniadis, A. Simulation of Milled Surface Topomorphy. International Journal of
    Simulation and Modeling, Vol.21/4/2001, pp.271-274.

  • Bouzakis, K. – Kompogiannis, S. – Antoniadis, A. – Vidakis, N. Gear Hobbing Cutting
    Process Simulation and Tool Wear Prediction Models. ASME Journal of Manufacturing
    Science and Engineering, Vol. 124/1/2002, pp. 42-51 – Published also in CIRP-Journal of
    Manufacturing Systems, Vol. 32/5/2003.

  • Antoniadis, A. – Vidakis, N. – Bilalis, N. “Fatique Fracture Investigation of Cemented
    Carbide Tools in Gear Hobbing. Part 1: FEM Modeling of Fly Hobbing and Computational
    Interpretation of Experimental Results”. ASME Journal of Manufacturing Science and
    Engineering, Vol.124/4/2002, pp.784-791

  • Antoniadis, A. – Vidakis, N. – Bilalis, N. Fatique Fracture Investigation of Cemented
    Carbide Tools in Gear Hobbing. Part 2: The Effect of Cutting Parameters on the Level of
    Tool Stresses – A Quantitative Parametric Analysis. ASME Journal of Manufacturing
    Science and Engineering, Vol.124/4/2002, pp.792-798

  • Bilalis, N. - Antoniadis, A. – Emiris, D. - Koulouriotis, D.Visual Factory : Basic principles
    and the “zoning” approach. International Journal of Production Engineering, Vol.
    40/15/2002, pp. 3575-3588

  • Αntoniadis, A. – Savakis, C. - Bilalis, N.- Balouktsis, A. Prediction of Surface
    Topomorphy and Roughness in Ball End Milling – International Journal of Advanced
    Manufacturing Technology, Vol.21/12/2003, pp.965-971

  •  Vidakis, N. - Antoniadis, A. - Bilalis, N. The VDI-3198 Indentation Test. Evaluation of a
    reliable Qualitative Control for Layered Compounds. Journal of Materials Processing
    Technology, Vol.143-144/2003, pp. 481-485

  • Antoniadis, A. – Vidakis, N. – Bilalis, N. A Simulation Model of Gear Skiving. Journal of
    Materials Processing Technology , Vol.146-2/2004, pp. 213-220

  • Petropoulos, G. - Vaxevanidis, N. - Pandazaras, C. - Antoniadis, A. Control of
    Representative Turned Surface Textures, WEAR, Vol.257-12/2004, pp.1270-1274

  • Maravelakis, E. – Bilalis, N. – Jones K.-A., – Antoniadis, A., Management of Technology, Key Success Factors for Innovation and Sustainable Development, “Establishing a Practical Company Innovative Benchmark”, Edited By Laure Morel-Guimaraes, Tarek Khalil, Yasser A Hosni, Elsevier 2005.

  • Maravelakis E., Bilalis N., Keith J., Antoniadis A., (2006), “Measuring and Benchmarking the Innovativeness of SME’s: a three dimensional Fuzzy Logic Approach”, Production Planning and Control Journal, Vol 17(3), pp 283-292

  • Petropoulos, G. - Vaxevanidis, N. - Pandazaras, C. - Antoniadis, A. Multi parameter
    identifcation & control of turned surface texture– International Journal of Advanced
    Manufacturing Technology, Vol.29/2006, pp.118-128.

  • Balouktsis, A. – Karapantsios, T. D. – Anastasiou, K., – Antoniadis A., – Balouktsis, I.
    Load matching in a Direct-Coupled Photovoltaic System – Application to Thevenin’s
    Equivalent Loads. International Journal of Photoenergy, Volume 8 (2006), Article ID
    27274.

  • Balouktsis, A. – Karapantsios, T.D. – Antoniadis A. – Paschaloudis, D. –
    Bezergiannidou, K. – Bilalis, N. Sizing Stand-Alone Photovoltaic Systems. International
    Journal of Photoenergy, Volume 8 (2006), Article ID 73650.

  • Maniadaki, K. – Kestis, Th. – Bilalis, N. – Αntoniadis, A. A Finite Element based model
    for Pure Waterjet Process Simulation – International Journal of Advanced Manufacturing
    Technology, (in press, DOI 10.1007/s00170-005-0274-8)

  • Bilalis, N. and Maravelakis, E. (2006) ‘Analysing the dependencies between the Innovation Attributes in NPD using Design Structure Matrix – the I-DSM tool’, Int. J. Product Development, Vol. 3, Nos. 3/4, pp.432–446.

  • Bilalis, N. – Wassenhove, L.V. – Maravelakis E. – Enders, A. – Moustakis, V. –
    Antoniadis, A. “An Analysis of the European Textile Sector Competitiveness”, Measuring
    Business Excellence Journal Vol.10-1/2006, pp. 27-35.

  • Maravelakis E., David K., Antoniadis A., Manios A., Bilalis N. and Papaharilaou Y., (2008), ”Reverse engineering techniques for cranioplasty: a case study”, Journal of Medical Engineering & Technology, 32:2, 115 -121.

  • Maravelakis, E. – Bilalis, N. – Jones K.-A., – Antoniadis, A., Management of Technology, Key Success Factors for Innovation and Sustainable Development, “Establishing a Practical Company Innovative Benchmark”, Edited By Laure Morel-Guimaraes, Tarek Khalil, Yasser A Hosni, Elsevier 2005.

  • Sahin M, Yaldiz S., Unsacar F., Yaldiz B., Bilalis N., Maravelakis E., Antoniadis A., (2008), “Virtual Training Centre for Computer Numerical Control”, Int. Journal of Computers, Communications & Control, Vol. III, No. 2, pp. 196-203.

  • Dimitriou, V. - Vidakis, N. - Antoniadis, A. Advanced Computer Aided Design Simulation
    of Gear Hobbing by Means of 3-Dimensional Kinematics Modeling, ASME Journal of
    Manufacturing Science and Engineering, (accepted 2006).

INTERNATIONAL CONFERENCES

  • Bilalis, N. - Jones, K.A. - Hall, C., - Antoniadis, A. - Maravelakis, E. Profiling Product's
    Innovation in New Product Development - ESDA 2002 - 8th Biennial Conference on
    Engineering Systems Design and Analysis - Constantinoupolis 8-11.7.2002.

  • Bilalis, N. – Lolos, D. - Antoniadis, A. – Emiris, D. A Fussy Sets approach to New
    Product Portfolio Management - IEEE- IEMC2002 – International Engineering
    Management Conference - Cambridge, UK 18-20.8.2002, pp.485-490.

  • Bilalis, N. – Dalavigas, A. - Antoniadis, A. – Athanasaki-Michailidou, H. A Methodology
    for evaluating software tools for the development of e-learning systems - ICEE-2002 –
    International Conference on Engineering Education - Manchester, UK 19-21.8.2002.

  • Antonidakis, E. - Stergallas, G. - Antoniadis, A. – Kaliakatsos, I. – Fragkiadakis, N.
    Integrated ODL Environments with Laboratories - ICEE-2002 – International Conference
    on Engineering Education - Manchester, UK 19-21.8.2002.

  • Bilalis, N. - Jones, K.A. - Maravelakis, E.- Antoniadis, A. Establishing a practical
    Company innovative Benchmark - IAMOT 2003 International Association for Management
    of Technology (IAMOT), Nancy France, 13-15.5.2002.

  • Bilalis, N. – Petousis, M. – Antoniadis, A. Industrial Applications’ Simulation
    Technologies in Virtual Environments - Part I: Virtual Prototyping. New Horizons in
    Industry and Education. Santorini 28-29.8.2003, pp.458-463.

  • Bilalis, N. – Petousis, M. – Antoniadis, A. Industrial Applications’ Simulation
    Technologies in Virtual Environments - Part II: Virtual Manufacturing & Virtual Assemply.
    New Horizons in Industry and Education. Santorini 28-29.8.2003, pp.464-472.

  • Antoniadis, A. - Bilalis, N. – Savakis, C. - Maravelakis, E. Influence of Machining
    Inclination angle on Surface Quality in Ball End Milling. AMPT’03 International Conference
    on Advanced Materials & Processing Technologies - Dublin 8-11.7.2003.

  • Maravelakis, E. - Bilalis, N. - Antoniadis, A. - Jones, K.A. Measuring and benchmarking
    the innovativeness of SME’s: a three dimensional fuzzy logic approach. 6th SMESME
    International Conference - Simulating Manufacturing Excellence in Small and Medium
    Entrprises. Athens 1-4.6.2003, pp.334-344.

  • Petropoulos, G. - Vaxevanidis, N. - Pandazaras, C. - Antoniadis, A. Shape Control of
    Representative Turned Surface Textures, 9th International Conference of Metrology and
    Properties on Engineering Surfaces. Sweden, 10-11.9.2003.

  • Bilalis, N. – Katsigiannis, Y. – Georgilakis, P. – Souflaris, A. - Antoniadis A. Automating
    the product design cycle for custom made products. International Design Conference -
    Design 2004, Dubrovnik Croatia, 18-21.5.2004.

  • Maravelakis, E. - Bilalis, N. - Antoniadis, A. – Moustakis, V. A novel approach to Product
    Development Profiling Assessment. The I-DSM Tool. 7th Biennial ASME Conference
    Engineering Systems Design and Analysis – ESDA 2004. Manchester UK, 19-22.7.2004.

  • Bilalis, N. – Maravelakis E. - Antoniadis, A. – Moustakis, V. “Mapping Product Innovation
    Profile to Product Development Activities – the I-DSM tool”, IEEE-IEMC2004, Singapore,
    18-21.10.2004

  • Petropoulos, G. – Pantazaras, C. – Vaxevanidis, N. – Antoniadis, A. “On the description
    of the bearing capacity of electro-discharge machined surfaces”, AMPT 2005, Gliwice-
    Wista Poland, 16-19.05.2005

  • Bilalis, N. – Alvizos, E. – Maravelakis E. – Antoniadis, A. – Wassenhove, L.V.
    “Stimulating Industrial Excellence in European Textile SME’s”, SMESME 2005, Glasgow
    12-15.06.2005

  • Bilalis, N. – Wassenhove, L.V. – Maravelakis E. – Enders, A. – Moustakis, V. –
    Antoniadis, A. “An Analysis of the European Textile Sector Competitiveness”, EUROMA
    2005, Budapest, 19-23.6.2005.

  • Katsamaki, A. – Bilalis, N. – Antoniadis, A. – Maravelakis E. “Implementation of Reverse
    Logistics in the Determination and Formulation of Product End-Of-Life Strategies”, 4th
    International Conference New Horizons in Industry and Education. Corfu 25-26.8.2005
    (BEST PAPER AWARD)

  • Bilalis, N. – Maravelakis E. – Wassenhove, L.V. – Antoniadis, A. “Providing a “tailormade”
    training assistance to industries”, 2005 WSEAS International Conference on
    Engineering Education, Athens, 8-10.07.2005.

  • Maniadaki, K. - Kestis, Th. - Antoniadis, A. - Bilalis, N. – Marioli-Riga, Z. “Optimization of
    Pure Water Jet Process Parameters using FE Modelling”, 2nd International Conference
    "From Scientific Computing to Computational Engineering" - Athens 2006

  • M. Bakarezos, S. Gymnopoulos1, S. Brezas, J. Orfanos, S. Maravelakis, A. Antoniadis,
    C. Papadopoulos, M. Tatarakis and N.A. Papadogiannis “Vibration analysis of top plates
    of traditional Greek string musical instruments” - 13th International Congress on Sound
    and Vibration 2-6/7/2006 Vienna, Austria

  • Emmanuel Maravelakis, Aristomenis Antoniadis, Nicholas Bilalis “3D scanning and
    vertical applications in Crete Island”, 2nd London 3D Imaging Technology Conference &
    Applications Workshop, 14-17/2/2006 London.

  • Şahin M., Bilalis N., Yaldız S., Antoniadis A., Ünsaçar F., Maravelakis E., (2007), “Revisiting CNC Training – a Virtual Training Centre for CNC”, International Conference on E-Portfolio Process in Vocational Education- EPVET 2007, Bucharest, Romania.

  • Ünsaçar F., Yaldız S., Şahin M., Bilalis N., Maravelakis E., Antoniadis A., (2007), “Promoting a Virtual Trainning Enviroment for CNC Machining ”, in 5th International Conference: “New Horizons in Industry, Business and Education (NHIBE 2007)”, pp 300-304, Santorini, August 2007.

  • Şahin M, Yaldız S., Ünsaçar F., Yaldiz B., Bilalis N., Maravelakis E., Antoniadis A., (2007), “Virtual Training Centre For CNC: a Sample Virtual Training Environment”, in 2nd International Conference on Virtual Learning – ICVL 2007., Constanta, Romania.

  • Maravelakis E, Yaldız S., Şahin M., I. Arik, Bilalis N., Antoniadis A., (2008), Designing an International Virtual Curriculum for Numerical Control of Machine Tools, INTED: International Association of Technology, Education and Development Conference, Valencia, Spain.

  • Mihai A., Şahin M, Yaldız S., Yalçın. G., Bilalis N., Maravelakis E., Antoniadis A., (2008), Virtual Training Center for Shoe Design: A Sample Virtual Training Environment, INTED: International Association of Technology, Education and Development Conference, Valencia, Spain.

  • E. Maravelakis, M. Andrianakis, K. Psarakis, N. Bolanakis, G. Tzatzanis, N. Bilalis, A. Antoniadis, (2008), “Lessons Learned from Cultural Heritage Digitisation Projects in Crete”, Proceedings of the 14th International Conference on Virtual Systems and Multimedia, pp152-156.

  • Catalin D., Sahin M., Mihai A., Yaldiz S., Bilalis N., Maravelakis E., “Τhe virtual training centre (vtc) for CNC(computer numerical control)”, In proceedings of the 3rd International Conference on Virtual Learning, ICVL 2008, pp 109-116

  • Mihai A., Sahin M. , Yaldiz S., Dragomir A., Bilalis N., Maravelakis E. “The virtual training centre for shoe design (vtc-shoe): a multilateral virtual training Model based on a common curriculum”, In proceedings of the 3rd International Conference on Virtual Learning, ICVL 2008, pp 117-128

  • Maravelakis, E., Yaldiz, S., Sahin, M., Catalin, D., Antoniadis, A., Bilalis, N., Experiences in new CNC Learning Innovations, International Conference of Education, Research and Innovation (ICERI 2008), November 17th-19th, 2008, Madrid, Spain
     

3 Romanou Str., 73-100, Chania, Greece, +3028210-23045 - dml@chania.teicrete.gr
© 2002-2009, All Rights Reserved. This site is maintained by DML.